|
Post by 302w on Jul 8, 2005 9:31:07 GMT -6
Last time my dad and I were out, we noticed the front bow tie looks like it wants to come loose. It's still plenty snug but just looks like it's coming loose. Any suggestions?
|
|
|
Post by John Payette on Jul 8, 2005 9:35:51 GMT -6
Yikes is their a bow panel you can remove and possibly tighten up the eye bolt?
|
|
|
Post by tsstagner on Jul 8, 2005 9:37:10 GMT -6
I would have your dealer (maybe under warranty?) or some fiberglass pro take a look at this soon. There is a lot of pressure here when you are trailering and it won't get any better.
|
|
|
Bow Tie
Jul 8, 2005 14:09:19 GMT -6
Post by 302w on Jul 8, 2005 14:09:19 GMT -6
There is a panal that you can remove but I think we might leave this up to an expert.
|
|
|
Bow Tie
Jul 9, 2005 20:45:11 GMT -6
Post by Won Hunglo on Jul 9, 2005 20:45:11 GMT -6
Easy fix. Remove the bow panel. Tighten the 2 backing buts on the bow hook. If they are stripped & you can't remove the nuts just cut the bow hook out & replace with a new stainless unit. The fiberglass around the bow hook is very strong & is not the weak point that wears. When your boat was being built at the factory it was suspended by the bow & stern hooks.
|
|